Metal insulation fixings are made of carbon steel or pre-galvanized sheet or stainless steel and more suitable to install and fix the rigid insulation boards on masonry, concrete or brick building walls. Its anchoring and fixing strength is stronger than plastic insulation plugs. For installation, just to pre-drill a installing hole through the insulation layer to enter the substrate, and hammer the head into insulation board for fixing.

    Designing a flat circular head punched six holes with 35 mm dia. distribute the loading to the insulation roof fasteners and the fixture with a larger area, and also be used for a dome shape in the center. Metal insulation anchors is used to fix metal plates, plastic plates or decorate wood panels as well.

    Metal insulation fasteners are also suitable to fix mineral wool insulation layer on brick wall and concrete soffit. Metal insulation wall anchors are more suitable for fixing rigid heat insulation panels. When used with mineral wool fireproof board in the external wall insulation system, the metal plate fireproof board fastener provides higher fire protection than other types of fasteners. It is usually used in applications that require horizontal or vertical fire barriers. Metal plate fireproof fastener is used to fix mineral wool board on the base material.Also using stainless steel wall insulation anchors to fix the external wall insulation layer to meet higher installation requirements.         

Product Features:

☛ Quick and simple installation by hammering head

☛ The dowel pin design make no additional screws or nails. 

☛ Loading duty is stronger than plastic insulation fixing plugs.

☛ Allow to fix the mineral wool fireproof board.

☛ More suitable to fix the rigid insulation boards.

Materials & Color: 

● Carbon steel & ZP / Pre-galvanized sheet, stainless steel.

Base Materials Of Building Wall: 

 ☑ Concrete ☑ Masonry ☑ Brickwork ☑ Brick wall ☑ Solid wall 

Applications:

♔ Fix various insulation boards.

Installation Steps:

① Pre-drill a installing hole passing through insulation board and base material to ensure the correct diameter and applicable depth.

② Use a nylon brush or high pressure air pump to remove all debris and dust.

③ Insert it into a guide hole in the insulation board.

④ To hammer the head until be fixed fully.

Product size description: ( mm )

**The special sizes could be customized.