Stainless steel cut anchor is heavy duty mechanical expansion anchors made of stainless steel 304/316 consisting of stainless steel 304 & 316 anchor body and a conical plug outside. Because of stainless steel material's excellent feature, the loading, tensile strength and expansion strength are stronger than carbon steel cut anchor including better anti-rust and corrosion proof function.

    The sizes of stainless steel cut anchors are same as steel cut anchors. The anchor body surface could be marked double knurlings, half knurling or without knurling including the welding cut anchor bolt with Diameter 10 mm and 12 mm.

     To install, put SS cut anchor bolt into a pre-drilled hole in substrate keeping the end having internal thread facing up and use a setting tool to hit with a hammer until cut anchor bolt is entirely expanded to generate expansion force and fasten loose bolt, stud bolt or other external fasteners to realize anchoring and fixing the objects in the solid concrete, masonry or brickwork substrates.SS 304 cut anchor is suitable for wet environment, where anchor body could be submerged in water. SS 316 cut anchor is suitable for seawater or chlorine and other immersion liquid invasion environment or the places needed special high-level requirements.  

Features:

▲ Stainless steel 304/316 with stronger loading and tensile strength & better anti-rust and corrosion protection than carbon steel material.

▲ Being suitable for outdoor, wet environment, seawater or chlorine and other immersion liquid invasion environment or the places needed special high-level requirements.  

▲ To assemble stainless steel loose bolt-hex bolt,stud bolt or other external thread fasteners to install.

▲ Cross cutting groove make steel plug expand anchor body easier and safer.

▲ Being suitable for medium and heavy duty loading purpose.

▲ Marked double knurlings,half knurling or without knurling on anchor body surface. 

▲ Special stainless steel welding cut anchor style is available.

Materials & Surface treatment: 

☞ Stainless steel 304/316

☞ Carton steel & Zinc plating and Zinc plated and yellow passivated.

Base Materials:  ☑ Concrete ☑ Masonry ☑ Brickwork ☑ Solid wall ☑ Stone

Applications:

ி Special door industry,Wall panel.

ி Installation of signboard, railings, shelves and gates.

ி Air conditioning and electrical installation engineering.

ி Installation of grating and fence and heavy machinery installing.

ி Internal and external door installation engineering.

ி Cable wiring engineering.

ி Structural expansion and rectification works.

Installation Instruction:

1]. Drill a hole in the base material to ensure the correct diameter and embedment depth.

2]. Use a nylon brush or high pressure air pump to remove all debris and dust.

3]. Insert ss cut anchor into the drilled hole to control correct embedment depth.

4]. Hit the opening end of anchor body by setting tool till being expanded completely.

5]. Pass ss fastener through a guide hole in the fixture and vertically aligned with and close to a substrate hole.

6]. To tighten the fastener by tool until be fixed fully.

Product size description: (mm/inch)

The sizes of stainless steel cut anchors are same as carbon steel cut anchors.

The sizes of stainless steel welding cut anchors are same as carbon steel welding cut anchors.

**The carbon steel,stainless steel and welding cut anchors are available.

**The special size and style are available according to the samples and sketches supplied.